The concrete mixing tank truck has been used for a long time, and it is inevitable that some failures will occur. Once the mixing tank truck fails, it needs to be repaired for a while. However, some drivers are not good at repairing the mixing tank and often make wrong operations, which not only can not repair the mixing tank, but will make the problem more serious. The following points are the precautions for maintenance of the mixing tank.
1. The body of the concrete mixing tank cannot be directly washed with water. The internal mechanism of the mixing tank body is relatively complex, and there are many grooves and through-hole designs. Once washed with water, the water deposits in the body is not easy to dry, and the parts are easy to rust.
2. It is not allowed to oil the tire bolts and nuts of the concrete mixing tank truck. Many drivers think that coating the tire bolts and nuts with lubricating oil can prevent the bolts and nuts from rusting. In fact, this practice is very dangerous, because it will bring great potential safety hazards to the driving of the mixing truck. Bolts and nuts have self-locking characteristics after being tightened, while lubricating oil will reduce the self-locking coefficient. During the operation of the mixing tank, once the bolts and nuts are loosened, safety accidents will occur.
3. Do not step on the accelerator when starting the EFI truck. Once the accelerator is stepped on, the engine of the concrete mixing tank truck will not start well.
The above is a detailed introduction to the automatic feeding mixer, and we hope it will be helpful to you. If you have any questions, you are welcome to contact us. We will provide services for you with our attitude /