Since the loading mixer, the operation is simple and the discharging is fast, the advantage is more obvious!
Self loading cement mixer is widely used in residential buildings, rural road construction, building squares, workshops... And other special vehicles for hardening construction with narrow roads. This product has a multi-function engineering mixer with self loading, self water supply, self mixing, 270 ° left rotation and right rotation, all terrain large angle unloading, high-pressure automatic tank washing.
Advantages of self loading mixer
1、 The operation is flexible and convenient. The time relay adds water to make the mixing more uniform and more in line with the standard. The operating lever is easy to operate.
2、 The front double wheel vacuum steel wire tire has greater load-bearing and reduces accidents.
3、 High pressure car washing gun makes the car cleaner! It is convenient and fast, and it is very convenient to clean when discharging. Manual cleaning is not required.
4、 Work every day to save 10 labor, save 100 degrees of electricity, no concrete truck and loader loading, all terrain work.
5、 The cab console can be rotated, which makes it more convenient to drive in both directions. The tilting unloading function of the vehicle makes the unloading cleaner and faster. The tilting unloading design makes the unloading of the vehicle more practical.
The automatic feeding mixer shall meet the following requirements before use
1. Check whether each water tank is short of water and add enough water, and whether the tire pressure meets 2.5bar_ Requirements.
2. Check the engine oil dipstick, hydraulic oil tank dipstick, gearbox oil gauge observation hole, front and rear axles, wheel reduction shaft head, unscrew the oil level oil plug, and check whether the gear oil meets the requirements. If it is missing, it should be added in time, and whether the liquid level of the master cylinder automatic oil cup meets the standard requirements.
3. Observe the engine oil and gear oil, and check the oil dipstick, the Gong hole of the oil pointer, and the hydraulic oil tank. The vehicle should be in a horizontal position.
4. The oil pipeline and gas pipeline joints of all parts of the vehicle are loose, and whether there is oil leakage or air leakage. Check whether the circuit of the whole vehicle has poor contact and whether the instruments and lights work normally.
5. Check whether the brake is effective before driving and whether the control valves work well.
The above is the content introduced for the automatic feeding mixer truck. Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation! /